Danfoss MCB 152 User Manual

NOTICE
Parameter group 600-** PROFIsafe is only visible in the MCT 10 Set-up Software.
600-** PROFIsafe
Parameter Options/Valid
range
Default value Description Conversion
index
Data type
600-44 Fault Message
Counter
0 - 65535 0 Shows the number of error messages shown
since the last reset.
- u_int16
600-52 Fault Situation
Counter
0 - 1000 0 Shows the number of error situations shown
since the last reset.
- u_int16
Table 7.6 600-** PROFIsafe
0-6* Password
Parameter Options/Valid
range
Default value Description Conversion
index
Data type
0-68 Safety
Parameters Password
0 - 9999 300 Enter the password that protects the safety
parameters.
- u_int16
0-69 Password
Protection of Safety
Parameters
[0] Disabled
[1] Enabled
[0] Disabled Enable the password that protects the safety
parameters.
- u_int8
Table 7.7 0-6* Password
Parameter Set-up
Safety Option MCB 152
30 Danfoss A/S © 10/2014 All rights reserved. MG37F102
77

Danfoss MCB 152 Specifications

General

Brand	Danfoss
Model	MCB 152
Category	Security Sensors
Language	English