Danfoss Metasys N2 Design Guide

3.1.1.4 CSA/cUL
The CSA/cUL approval is for AC drives of voltage rated at
600 V or lower. The standard ensures that, when the drive
is installed according to the provided operating/installation
guide, the equipment meets the UL standards for electrical
and thermal safety. This mark certies that the product
performs to all required engineering specications and
testing. A certicate of compliance is provided on request.
3.1.1.5 EAC
The EurAsian Conformity (EAC) mark indicates that the
product conforms to all requirements and technical
regulations applicable to the product per the EurAsian
Customs Union, which is composed of the member states
of the EurAsian Economic Union.
The EAC logo must be both on the product label and on
the packaging label. All products used within the EAC area,
must be bought at Danfoss inside the EAC area.
3.1.1.6 UKrSEPRO
UKrSEPRO certicate ensures quality and safety of both
products and services, in addition to manufacturing
stability according to Ukrainian regulatory standards. The
UkrSepro certicate is a required document to clear
customs for any products coming into and out of the
territory of Ukraine.
3.1.1.7 TÜV
TÜV SÜD is a European safety organization which certies
the functional safety of the drive in accordance to EN/IEC
61800-5-2. The TÜV SÜD both tests products and monitors
their production to ensure that companies stay compliant
with their regulations.
3.1.1.8 RCM
The Regulatory Compliance Mark (RCM) indicates
compliance with telecommunications and EMC/radio-
communications equipment per the Australian
Communications and Media Authorities EMC labeling
notice. RCM is now a single compliance mark covering
both the A-Tick and the C-Tick compliance marks. RCM
compliance is required for placing electrical and electronic
devices on the market in Australia and New Zealand.
3.1.1.9 Marine
In order for ships and oil/gas platforms to receive a
regulatory license and insurance, 1 or more marine certi-
cation societies must certify these applications. Up to 12
dierent marine classication societies have certied
Danfoss drive series.
To view or print marine approvals and certicates, go to
the download area at http://drives.danfoss.com/industries/
marine-and-oshore/marine-type-approvals/#/.
3.1.2 Export Control Regulations
Drives can be subject to regional and/or national export
control regulations.
An ECCN number is used to classify all drives that are
subject to export control regulations.
The ECCN number is provided in the documents
accompanying the drive.
In case of re-export, it is the responsibility of the exporter
to ensure compliance with the relevant export control
regulations.
Approvals and Certication... Design Guide
MG16C302 Danfoss A/S © 11/2017 All rights reserved. 9
3 3

Danfoss Metasys N2 Specifications

General

Brand	Danfoss
Model	Metasys N2
Category	DC Drives
Language	English