Signal types
•
RTD inputs (including Pt100) – 3-wire or 4-wire.
•
Thermocouple.
•
Analog current or analog voltage.
More features
•
1 universal output – congurable for analog
voltage or analog current.
•
2 output relays (NO).
•
Dual-line LC display and LED diagnostics.
•
Sensor lead wire break, short circuit, and incorrect
polarity detection.
•
Sensor lead wire break, short circuit, and incorrect
polarity detection.
•
Interface set-up software.
•
If 3 PTC are required, the VLT
®
PTC Thermistor
Card MCB 112 option must be added.
Ordering numbers for enclosure built-in options can be
found in chapter 13.1 Drive
Congurator.
6.10 High-power Kits
High-power kits, such as back-wall cooling, space heater,
mains shield, are available. See chapter 13.2 Ordering
Numbers for Options/Kits for a brief description and
ordering numbers for all available kits.
Options and Accessories Ove... Design Guide
MG16C302 Danfoss A/S © 11/2017 All rights reserved. 47
6
6
To Next Page
Loading...
Need help?
General