PVE-EX: PVE control by voltage
PVE characteristic – control by voltage
PVEU
fixed
7.5V
5V2.5V
kwa1463778286972
PVE-EX ON/OFF activation
The PVEO has two independent powered sets of solenoids. By powering a set of pins the actuator is
activated. By standard mounted PVE the A set gives full flow on A port and B gives on B port. Both
directions activated at same time will keep the spool in neutral.
Technical Information
Electrohydraulic Actuators PVE-EX
PVE-EX control
10 |
©
Danfoss | October 2017 BC00000393en-US0102
To Next Page
Loading...
Need help?
General
