Danfoss PVE 7 Series User Manual

External earth-connection
External earthing terminal enables a earth wire to be connected to the PVE-EX.
1. Crimp or solder the earth wire into the cable shoe.
2. Attach the cable shoe to the chassis via the M4 screw and the self-locking ring.
3. Tighten the screws to the specified torque 5 ± 2 N•m.
Technical Information
Electrohydraulic Actuators PVE-EX
Internal and external earth-connection
26 |
©
Danfoss | October 2017 BC00000393en-US0102

Danfoss PVE 7 Series Specifications

General

Brand	Danfoss
Model	PVE 7 Series
Category	Controller
Language	English