Do not regard the warnings as a full list of potential dangers. Depending on the application and use,
other potential dangers can occur.
Warning
All brands and all types of directional control or proportional valves, which are used in many different
operation conditions and applications, can fail and cause serious damage.
Analyze all aspects of the application. The machine builder/system integrator alone is responsible for
making the final selection of the products and assuring that all performance, safety and warning
requirements of the application are met.
The process of choosing the control system and safety levels is governed by the machine directives EN
13849 (Safety related requirements for control systems).
Technical Information
Electrohydraulic Actuators PVE-EX
General information
6 |
©
Danfoss | October 2017 BC00000393en-US0102
To Next Page
Loading...
Need help?
General
