Danfoss PVE Series 4 - PVEO Pinout and Connections

PVG 120 and PVG 32 combo with Deutsch connector
362 [14.25]
36.3 [1.43]
50.1
[1.97]
195.6 [7.70]
V310 383
PVEO pinout
PVEO with direction indication (DI) connection
Connector 1 A U
DC
B U
DC
Gnd Gnd
AMP (grey) p 1 p 2 p 3 p 4
Connector 2 DI-B DI-A Gnd U
DC2
AMP (black) p 1 p 2 p 3 p 4
PVEO standard connection
Connector A B
AMP/Hirschmann/DIN pin 1 pin 2
Deutsch pin 1 pin 4
Function A (pin 1) B (pin 2)
Neutral 0 0
Q: P → A UDC 0
Q: P → B 0 UDC
All PVEO Connections
Connector A B
AMP/Hirschmann/DIN pin 1 pin 2
Deutsch pin 1 pin 4
•
Ground pins are internally connected.
•
Pin 3 is not connected on Hirschmann/DIN version of PVEO.
•
U
DC2
supplies electronics for feedback signal on PVEO-DI.
Technical Information
PVE, Series 4 for PVG 32/100/120 and PVHC
Technical Data
520L0553 • Rev GD • Jan 2014 41