Danfoss PVE Series 4 User Manual

Cables code numbers
Feature Wire colors Length Code number
Connector pin 1 pin 2 pin 3 pin 4 pin 5 pin 6
Deutsch 4 pin white blue yellow red — — 4 m 11007498
4 pin white blue yellow red — — 4 m 11099720 *24V
6 pin white blue yellow red black green 4 m 11007513
AMP 4 pin white blue yellow red — — 4 m 157B4994
4 pin white blue yellow red — — 4 m 11099719 *24V
6 pin white red black yellow green blue 5 m 157B4974
AMP/black coding 4 pin white blue yellow red — — 4 m 157B4995 **-DI
Cables are with oil resistant coating.
* 24 V Special cable for use with PLUS+1
®
micro-controller in 24 V systems.
** -DI additional cable for PVE with direction indication.
Connector code numbers at other suppliers
Connector part numbers for purchase at other suppliers
Connector House wire sealing
(blue)
JPT contact
(loose piece)
sealing mat between
male-female part
Deutsch female 4 pin DT06-4S — — —
6 pin DT06-6S
AMP female/grey 4 pin 2-967059-1 828904-1 929930-1 963208-1
6 pin 2-963212-1 — 963205-1
AMP female/black 4 pin 1-967059-1 —
AMP crim tool 169400-1
AMP die set for crimp tool 734253-0
These connector code numbers are not Danfoss numbers.
PVED code numbers for use on PVG 32 and PVG 100
Cables code numbers for PVED-CC
Feature Wire colors Description Code
number
Connector pin 1 pin 2 pin 3 pin 4
Deutsch 4 pin white blue yellow red 4 m cable 11007498
AMP 4 pin white blue yellow red 4 m cable 157B4994
AMP/black 4 pin white blue yellow red 4 m cable 157B4995
Cables code numbers for PVED-CC (continued)
Feature Description Code number
Connector
Service tool interface cable/ AMP 4 m cable 157B4977
AMP 0.1m loop cable 157B4987
Technical Information PVE, Series 4 for PVG 32/100/120 and PVHC
PVE code numbers
520L0553 • Rev GD • Jan 2014 51

Danfoss PVE Series 4 Specifications

General

Brand	Danfoss
Model	PVE Series 4
Category	Controller
Language	English