VLT
®
6000 HVAC
5MG.60.B1.02 - VLT is a registered Danfoss trademark
Introduction to
HVAC
■■
■■
■ Introduction to the Design Guide
This Design Guide is a tool intended to facilitate the sizing of systems in which VLT 6000 HVAC frequency
converters are used.
HVAC stands for Heating Ventilation Air-Conditioning.
This Design Guide progresses step-by-step through the different procedures required for selecting, installing and
programming a VLT 6000 HVAC.
The Design Guide forms part of the literature concept supplied with VLT 6000 HVAC. However, the Design Guide
is the most comprehensive document available.
When a VLT 6000 HVAC is supplied, it is accompanied by Operating Instructions and a Quick Setup Guide. See
next page Other literature.
Operating Instructions:Operating Instructions:
Operating Instructions:Operating Instructions:
Operating Instructions: Describe how to ensure optimum mechanical and electrical installation, and
also deal with commissioning and service. The Operating Instructions
furthermore provide a description of the software parameters, thereby
ensuring that you can easily fit the VLT 6000 HVAC into your application.
Quick Setup Guide:Quick Setup Guide:
Quick Setup Guide:Quick Setup Guide:
Quick Setup Guide: Helps you get your VLT 6000 HVAC installed and commissioned quickly.
Design Guide:Design Guide:
Design Guide:Design Guide:
Design Guide: Used when designing systems with VLT 6000 HVAC. The Design Guide gives
all useful information about the VLT 6000 HVAC and HVAC systems. There is
a selection tool for you to choose the right VLT 6000 HVAC with the relevant
options and modules. The Design Guide has examples of the most common
types of HVAC applications. In addition, the Design Guide has all information
relating to Serial Communication.
This Design Guide is split in four sections that have information about VLT 6000 HVAC.
Introduction to HVAC:Introduction to HVAC:
Introduction to HVAC:Introduction to HVAC:
Introduction to HVAC: This section tells you the advantages that can be obtained by using
frequency converters in HVAC systems. Furthermore, you can read about the
way a frequency converter operates and about the advantages of the VLT
6000 HVAC, such as AEO - Automatic Energy Optimisation, RFI filter and
other HVAC-relevant functions.
There are also examples of applications and information is given about
Danfoss and CE-labelling.
The specification section deals with the requirements relating to being
allowed to supply and install frequency converters. This section can be used
in contract documents, whereby the total list of requirements relating to
frequency converters is determined.
The section ends with an Ordering Guide that makes it easier for you to
specify and order a VLT 6000 HVAC.
To Next Page
Loading...
Need help?
General