Danfoss VLT AAF006 Service Manual

7 D-Frame Sizes Disassembly and Assembly Instructions
7.1 Electrostatic Discharge (ESD)
CAUTION
Filters contain dangerous voltages when connected to AC
line voltage. No disassembly should be attempted with
power applied. Remove power to the filter and wait at
least 20 minutes to let the filter capacitors fully discharge.
Only a competent technician should carry out service.
ELECTROSTATIC DISCHARGE (ESD)
Many electronic components within the filter are sensitive
to static electricity. Voltages so low that they cannot be
felt, seen or heard can reduce the life, affect performance,
or completely destroy sensitive electronic components.
CAUTION
Use proper electrostatic discharge (ESD) procedures to
prevent damage to sensitive components when servicing
the filter.
NOTE!
Frame size is used throughout this manual wherever
procedures or components differ between filters based
upon the unit's physical size. Refer to the tables in the
Introduction section to determine frame size definitions.
See for E-frame sizes disassembly and assembly
instructions.
D-Frame Sizes Disassembly a... VLT Advanced Active Filter AAF006 D and E Frames Service Manual
MG90Z122 - VLT
®
is a registered Danfoss trademark 7-1
7 7

Danfoss VLT AAF006 Specifications

General

Brand	Danfoss
Model	VLT AAF006
Category	Water Filtration Systems
Language	English