Figure 7.6 Input Terminal Mounting Plate
1
Input terminal mounting plate 6 Line power disconnect (optional)
2 Cross bus bar terminal 7 L3
3 Cross bus bar terminal 8 L2
4 Cross bus bar terminal 9 L1
5 Line power disconnect fuse (optional)
Table 7.6
Reinstall in the reverse order of this procedure. See
Table 1.7 for torque tightening values.
D-Frame Sizes Disassembly a... VLT Advanced Active Filter AAF006 D and E Frames Service Manual
7-10 MG90Z122 - VLT
®
is a registered Danfoss trademark
77