Figure 8.8 Input Terminal Mounting Plate
1
Input terminal mounting plate 6 Line power disconnect (optional)
2 Cross bus bar terminal 7 L3
3 Cross bus bar terminal 8 L2
4 Cross bus bar terminal 9 L1
5 Line power disconnect fuse (optional)    
Table 8.8
Reinstall in the reverse order of this procedure. See
Table 1.7 for torque tightening values.
E-Frame Sizes Disassembly a... VLT Advanced Active Filter AAF006 D and E Frames Service Manual
MG90Z122 - VLT
®
 is a registered Danfoss trademark 8-11
8 8