Danfoss VLT AFE 302 - 5 How to Programme; Parameter Selection

5 How to Programme
5.1 Parameter Selection
Parameters for AFE 302 are grouped into various parameter
groups for easy selection of the correct parameters for
optimized operation of the frequency converter.
0-** Operation and Display
•
Basic Settings, set-up handling
•
Display and Local Control Panel parameters for
choosing readouts, setting up selections and
copying functions
4-** Limits Warnings
5-** Digital inputs and outputs includes relay controls
7-** Controllers
8-** Communications and Options
14-** Special functions
15-** AFE information
16-** Data Read-Out
40-** Mains/Filter
How to Programme
VLT
®
Active Front End AFE 302 Operating Instructions Liebherr
MG.33.X2.02 - VLT
®
is a registered Danfoss trademark 33
5 5