4.2.4 Lifting
Illustration 4.4 and Illustration 4.5 show the main load carrying points of the F-frame cabinets. Lift the cabinets with all the lifting
eyes and/or use a bar to avoid bending the lifting holes of the frequency converters. The same principle is applied for the AFE
cabinets.
Illustration 4.4 1: Main Load Carrying Points 2: Main Load Carrying Points
How to Install
VLT
®
Active Front End AFE 302 Operating Instructions Liebherr
24 MG.33.X2.02 - VLT
®
is a registered Danfoss trademark
44
To Next Page
Loading...
