Danfoss VLT AFE 302 - Page 45

Enables use of freely configurable telegrams or standard
telegrams for the FC port.
8-40 Telegram Selection
Option: Function:
[1] * Standard Telegram 1
[101] PPO 1
[102] PPO 2
[103] PPO 3
[104] PPO 4
[105] PPO 5
[106] PPO 6
[107] PPO 7
[108] PPO 8
[200] Custom telegram 1
5.6.4 8-5* Digital/Bus
Parameters for configuring the control word Digital/Bus
merging.
NOTE
These parameters are active only when 8-01 Control Site is set
to [0] Digital and control word.
8-53 Start Select
Option: Function:
Allows a choice between controlling the Start
function via the terminals (digital input) and/or
via the bus.
NOTE
This parameter is only active if par. 8-01 is
set to [0] Digital and control word.
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
How to Programme
VLT
®
Active Front End AFE 302 Operating Instructions Liebherr
44 MG.33.X2.02 - VLT
®
is a registered Danfoss trademark
55