Danfoss VLT AFE 302 - Page 50

15-44 Ordered Typecode String
Option: Function:
View the type code string used for re-ordering the AFE in
its original configuration.
15-45 Actual Typecode String
Range: Function:
0 N/A* [0 - 0 N/A] View the actual type code string.
15-46 AFE Ordering No
Option: Function:
View the 8-digit ordering number used for re-ordering the
AFE in its original configuration.
15-47 Power Card Ordering No
Range: Function:
0 N/A* [0 - 0 N/A] View the power card ordering number.
15-48 LCP Id No
Range: Function:
0 N/A* [0 - 0 N/A] View the LCP ID number.
15-49 SW ID Control Card
Range: Function:
0 N/A* [0 - 0 N/A] View the control card software version
number.
15-50 SW ID Power Card
Range: Function:
0 N/A* [0 - 0 N/A] View the power card software version
number.
15-51 AFE Serial Number
Option: Function:
View the AFE serial number.
15-53 Power Card Serial Number
Range: Function:
0 N/A* [0 - 0 N/A] View the power card serial number.
5.8.5 15-9* Parameter Info
15-92 Defined Parameters
Array [1000]
0* [0 - 9999] View a list of all defined parameters in the AFE. The
list ends with 0.
15-93 Modified Parameters
Array [1000]
Range: Function:
0 N/A* [0 - 9999 N/
A]
View a list of the parameters that have been
changed from their default setting. The list
ends with 0. Changes may not be visible
until up to 30 seconds after implemen-
tation.
15-99 Parameter Metadata
Array [30]
Range: Function:
0* [0 - 9999 ] This parameter contains data used by the .
How to Programme
VLT
®
Active Front End AFE 302 Operating Instructions Liebherr
MG.33.X2.02 - VLT
®
is a registered Danfoss trademark 49
5 5