9.3.2 Operation/Display 0-**
Par.
No. #
Parameter description Default value 4-set-up Change
during
operation
Conver-
sion index
Type
0-0* Basic Settings
0-01 Language [0] English 1 set-up TRUE - Uint8
0-04 Operating State at Power-up (Hand) [1] Forced stop All set-ups TRUE - Uint8
0-1* Set-up Operations
0-10 Active Set-up [1] Set-up 1 1 set-up TRUE - Uint8
0-11 Edit Set-up [1] Set-up 1 All set-ups TRUE - Uint8
0-12 This Set-up Linked to [0] Not linked All set-ups FALSE - Uint8
0-13 Readout: Linked Set-ups 0 N/A All set-ups FALSE 0 Uint16
0-14 Readout: Edit Set-ups / Channel 0 N/A All set-ups TRUE 0 Int32
0-2* Display
0-20 Display Line 1.1 Small 30112 All set-ups TRUE - Uint16
0-21 Display Line 1.2 Small 30110 All set-ups TRUE - Uint16
0-22 Display Line 1.3 Small 30120 All set-ups TRUE - Uint16
0-23 Display Line 2 Large 30100 All set-ups TRUE - Uint16
0-24 Display Line 3 Large 30121 All set-ups TRUE - Uint16
0-25 My Personal Menu ExpressionLimit 1 set-up TRUE 0 Uint16
0-4* Keypad
0-40 [Hand on] Key on [1] Enabled All set-ups TRUE - Uint8
0-41 [O] Key on [1] Enabled All set-ups TRUE - Uint8
0-42 [Auto on] Key on [1] Enabled All set-ups TRUE - Uint8
0-43 [Reset] Key on [1] Enabled All set-ups TRUE - Uint8
0-5* Copy/Save
0-50 Copy [0] No copy All set-ups FALSE - Uint8
0-51 Set-up Copy [0] No copy All set-ups FALSE - Uint8
0-6* Password
0-60 Main Menu Password 100 N/A 1 set-up TRUE 0 Int16
0-61 Access to Main Menu w/o Password [0] Full access 1 set-up TRUE - Uint8
0-65 Quick Menu Password 200 N/A 1 set-up TRUE 0 Int16
0-66 Access to Quick Menu w/o Password [0] Full access 1 set-up TRUE - Uint8
Appendix A - Parameters Installation Manual
MG21B322 Danfoss A/S © 10/2015 All rights reserved. 107
9 9
To Next Page
Loading...
Need help?
General