5.3.1 Local Control Panel 52
5.3.2 LCP Layout 53
5.3.3 Parameter Settings 54
5.3.4 Uploading/Downloading Data to/from the LCP 54
5.3.5 Changing Parameter Settings 54
5.3.6 Restoring Default Settings 55
5.4 Basic Programming
55
5.4.1 VLT
®
Low Harmonic Drive Programming 55
5.4.2 Commissioning with SmartStart 55
5.4.3 Commissioning via [Main Menu] 56
5.4.4 Asynchronous Motor Set-up 56
5.4.5 Permanent Magnet Motor Set-up 57
5.4.6 Automatic Energy Optimization (AEO) 58
5.4.7 Automatic Motor Adaptation (AMA) 59
5.5 Checking Motor Rotation
59
5.6 Local Control Test
59
5.7 System Start-up
59
6 Application Examples
60
6.1 Introduction
60
6.2 Application Examples
60
7 Diagnostics and Troubleshooting
65
7.1 Status Messages
65
7.2 Warning and Alarm Types
65
7.2.1 Warnings 65
7.2.2 Alarm Trip 65
7.2.3 Alarm Trip-lock 65
7.3 Warnings and Alarm Denitions - Adjustable Frequency Drive
65
7.4 Warning and Alarm Denitions - Filter (Left LCP)
74
7.5 Troubleshooting
79
8 Specications
82
8.1 Power-Dependent Specications
82
8.1.1 Mains Supply 3x380–480 V AC 82
8.1.2 Derating for Temperature 85
8.2 Mechanical Dimensions
86
8.3 General Technical Data - Adjustable Frequency Drive
90
8.4 Fuses
97
8.4.1 Non- UL compliance 97
Contents Installation Manual
MG21B322 Danfoss A/S © 10/2015 All rights reserved.
To Next Page
Loading...
Need help?
General