Danfoss vlt aqua Design Guide

Type Description Ordering no.
Options for Slot A Uncoated / Coated Uncoated Coated
MCA 101 Profibus option DP V0/V1 130B1100 130B1200
MCA 104 DeviceNet option 130B1102 130B1202
MCA 108 LON works 130B1106 130B1206
Options for Slot B
MCB 101 General purpose Input Output option 130B1125 130B1212
MCB 105 Relay option 130B1110 130B1210
MCB 109 Analog I/O option 130B1143 130B1243
MCB 114 PT 100 / PT 1000 sensor input 130B1172 10B1272
MCO 101 Extended Cascade Control 130B1118 130B1218
Options for C0
Mounting kit for frame size A2 and A3 (1.57 in [40 mm] for one C option) 130B7530
Mounting kit for frame size A2 and A3 (2.36 in [60 mm] for C0 + C1 option) 130B7531
Mounting kit for frame size A5 130B7532
Mounting kit for frame size B, C, D. E and F2 and 3 (except B3) 130B7533
Mounting kit for frame size B3 (1.57 in [40 mm] for one C option) 130B1413
Mounting kit for frame size B3 (2.36 in [60 mm] for C0 + C1 option) 130B1414
Option for Slot C
MCO 102 Advanced Cascade Control 130B1154 130B1254
Option for Slot D
MCB 107 24 V DC back-up 130B1108 130B1208
VLT
®
AQUA Drive Design Guide 4 How to Order
MG.20.N5.22 - VLT
®
is a registered Danfoss trademark 4-7
4

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled