Figure 5.20: Assembling the IP21 / IP55 / NEMA TYPE 12 housing with line power disconnector.
5.3.11 Basic Wiring Example
1. Mount terminals from the accessory bag to the front of the ad-
justable frequency drive.
2. Connect terminals 18 and 27 to +24 V (terminal 12/13)
Default settings:
18 = Start
27 = stop inverse
Figure 5.21: Terminal 37 available with Safe Stop Function
only!
5 How to Install VLT
®
AQUA Drive Design Guide
5-28
MG.20.N5.22 - VLT
®
is a registered Danfoss trademark
5
To Next Page
Loading...
