Danfoss vlt aqua Operating Instructions

6.5.8 AF Readouts301-**
Par. No.
#
Parameter description Default value 4-set-up FC 302
only
Change
during op-
eration
Conver-
sion index
Type
301-0* Output Currents
301-00 Output Current [A] 0.00 A All set-ups TRUE -2 Int32
301-01 Output Current [%] 0.0 % All set-ups TRUE -1 Int32
301-1* Unit Performance
301-10 THD of Current [%] 0.0 % All set-ups TRUE -1 Uint16
301-12 Power Factor 0.00 N/A All set-ups TRUE -2 Uint16
301-13 Cosphi 0.00 N/A All set-ups TRUE -2 Int16
301-14 Leftover Currents 0.0 A All set-ups TRUE -1 Uint32
301-2* Mains Status
301-20 Mains Current [A] 0 A All set-ups TRUE 0 Int32
301-21 Mains Frequency 0 Hz All set-ups TRUE 0 Uint8
301-22 Fund. Mains Current [A] 0 A All set-ups TRUE 0 Int32
VLT AQUA Low Harmonic Drive Operating In-
structions 6 How to Programme the Low Harmonic Drive
MG.20.T1.02 - VLT
®
is a registered Danfoss trademark 149
6

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled