Danfoss vlt aqua User Manual

4.1.5 Changing a Text Value
If the selected parameter is a text value, it can be changed by using the
up/down navigation keys.
The up key increases the value, and the down key decreases the value.
Place the cursor on the value to be saved and press [OK].
Figure 4.6: Display example.
4.1.6 Changing a Group of Numeric Data Values
If the chosen parameter represents a numeric data value, change the
chosen data value using the <> navigation keys as well as the up/down
navigation keys. Use the <> navigation keys to move the cursor hori-
zontally.
Figure 4.7: Display example.
Use the up/down navigation keys to change the data value. The up key
increases the data value, while the down key reduces it. Place the cursor
on the value to be saved and press [OK].
Figure 4.8: Display example.
4.1.7 Changing Data Values, Step-by-Step
Certain parameters can be changed step-by-step or by an infinite number of variables. This applies to par. 1-20 Motor Power [kW] , par. 1-22 Motor
Voltage
and par. 1-23 Motor Frequency .
The parameters are changed both as a group of numeric data values, and as numeric data values using an infinite number of variables.
4 How to operate the adjustable frequency
drive
VLT AQUA High Power Instruction Manual
4-10 MG.20.P3.22 - VLT
®
is a registered Danfoss trademark
4

Danfoss vlt aqua Specifications

General

Brand	Danfoss
Model	vlt aqua
Category	DC Drives
Language	English