5.2.5 4-** Limits and Warnings
Parameter group for configuring limits and warnings.
4-11 Motor Speed Low Limit [RPM]
Range: Function:
Application
dependent*
[Application dependant]
4-13 Motor Speed High Limit [RPM]
Range: Function:
Application
dependent*
[Application dependant]
NOTE!
The output frequency value of the adjustable frequency drive must not exceed a value higher than 1/10 of the switching frequency.
NOTE!
Any changes in par. 4-13
Motor Speed High Limit [RPM]
will reset the value in par. 4-53
Warning Speed High
to the same value as set
in par. 4-13
Motor Speed High Limit [RPM]
.
5 How to program the adjustable frequency
drive
VLT AQUA High Power Instruction Manual
5-20
MG.20.P3.22 - VLT
®
is a registered Danfoss trademark
5
To Next Page
Loading...
