Danfoss VLT AutomationDrive FC 302

7.2.3 Parameter Group 42-6* Safe Fieldbus 50
7.2.4 Parameter Group 42-8* Status 51
7.2.5 Parameter Group 42-9* Special 52
7.2.6 Parameter Group 600-** PROFIsafe 52
7.2.7 Parameter Group 0-6* Password 53
8 Application Examples 54
8.1 Connecting Safe Digital Inputs 54
9 Maintenance, Diagnostics, and Troubleshooting 57
9.1 Maintenance and Service 57
9.1.1 Yearly Test 57
9.2 Repair and Troubleshooting 58
9.2.1 Removing the Safety Option (FC 302 only) 58
9.2.2 Replacing the Safety Option (FC 302 only) 59
9.2.3 Mismatch of Safety Option Parameters (FC 302 only) 60
9.2.3.1 Transferring Parameter 60
9.2.4 Copying Safe Parameter Configuration 60
9.3 Error Conditions 61
9.3.1 Error Descriptions 61
9.4 LCP Messages 68
9.4.1 LCP Status Messages 69
10 Specifications 72
10.1 Consumption 72
10.2 Inputs 72
10.2.1 Digital Inputs 72
10.3 Output 72
10.3.1 Digital Output (Safe Output) 72
10.3.2 24 V Supply Output 72
10.4 Other Specifications 73
10.4.1 Connector Cable Dimensions 73
10.4.2 Reset Characteristics 73
10.4.3 Response Time 73
10.4.4 Safety Characteristic Data 73
11 Appendix 76
11.1 Abbreviations 76
11.2 Conventions 77
ContentsInstallation Guide | VLT®Safety Option MCB 152
AN327351953089en-000101 / | 5Danfoss A/S © 2020.02