Danfoss VLT FC 100 Series Programming Guide

23-81 Energy Cost
Range: Function:
0.00 * [0.00 - 999999.99]
Set the actual cost for a kWh in local currency. If the energy cost is changed later on it will impact the calculation
for the entire period!
23-82 Investment
Range: Function:
0.00 * [0.00 - 999999.99]
Set the value of the investment spent on upgrading the plant with speed control, in same currency as used in
par. 23-81,
Energy Cost .
23-83 Energy Savings
Range: Function:
0 kWh * [0-0 kWh]
This parameter allows a readout of the accumulated difference between the reference power and the actual
output power.
If motor size set in Hp (par. 1-21), the equivalent kW value will be used for the Energy Savings.
23-84 Cost Savings
Range: Function:
0.00 * [0 - 0]
This parameter allows a readout of the calculation based on the above equation (in local currency).
VLT
®
HVAC Drive Programming Guide 3. Parameter Description
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark 201
3

Danfoss VLT FC 100 Series Specifications

General

Brand	Danfoss
Model	VLT FC 100 Series
Category	DC Drives
Language	English