2.1.6. Function Setups
The Function set-up provides quick and easy access to all parameters required for the majority of VLT HVAC Drive applications including most VAV and
CAV supply and return fans, cooling tower fans, Primary, Secondary and Condenser Water Pumps and other pump, fan and compressor applications.
How to access Function Set-up - example
130BT110.1
Illustration 2.7: Step 1: Turn on the frequency converter (yellow LED
lights)
130BT111.1
Illustration 2.8: Step 2: Press the [Quick Menus] button (Quick Menus
choices appear).
130BT112.1
Illustration 2.9: Step 3: Use the up/down navigation keys to scroll down
to Function Setups. Press [OK].
130BT113.1
Illustration 2.10: Step 4: Function Setups choices appear. Choose 03-1
General Settings
. Press [OK].
130BT114.1
Illustration 2.11: Step 5: Use the up/down navigation keys to scroll
down to i.e. 03-11
Analog Outputs
. Press [OK].
2. How to Programme VLT
®
HVAC Drive Programming Guide
16
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
2
To Next Page
Loading...
