Danfoss VLT Flow Drive FC 111 - Page 141

4.12.3 15-4* Drive Identification
Parameters containing read-only information about the hardware and software configuration of the drive.
15-40 FC Type
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: VisibleString
Change during operation: False
View the FC type code. The readout is identical to the drive series power field of the type code definition, characters 1–6.
Table 276: Range:
Min: 0
Max: 6
Default value: 0
15-41 Power Section
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: VisibleString
Change during operation: False
View the FC type code. The readout is identical to the drive series power field of the type code definition, characters 7–10.
Table 277: Range:
Min: 0
Max: 20
Default value: 0
15-42 Voltage
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: VisibleString
Change during operation: False
View the FC type code. The readout is identical to the drive series power field of the type code definition, characters 11–12.
Table 278: Range:
Min: 0
Max: 20
Default value: 0
15-43 Software Version
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: VisibleString
Change during operation: False
View the software version of the drive.
Table 279: Range:
Min: 0
Max: 0
Default value: 0
15-44 Ordered TypeCode
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: VisibleString
Change during operation: False
View the type code string used for reordering the drive in its original configuration.
Table 280: Range:
Min: 0
Max: 40
Default value: 0
AU363928304090en-000101 / 130R0982 | 141Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide