Danfoss VLT Flow Drive FC 111 User Manual

1
1.1
1.2
1.2.1
1.2.2
1.3
1.4
2
2.1
2.2
2.3
3
3.1
3.2
3.2.1
3.2.2
3.2.2.1
3.2.2.2
3.2.2.3
3.2.2.4
3.2.2.5
3.2.2.6
3.2.2.7
3.2.2.8
3.2.3
3.3
3.3.1
3.3.2
3.4
3.5
3.5.1
3.5.2
4
4.1
4.2
Contents
Introduction 5
Purpose of this Programming Guide 5
Additional Resources 5
Other Resources 5
MCT 10 Set-up Software Support 5
Document and Software Version 5
Electrical Wiring 5
Safety 7
Safety Symbols 7
Qualified Personnel 7
Safety Precautions 7
Programming 9
Local Control Panel (LCP) 9
Menus 10
Status Menu 10
Quick Menu 10
Quick Menu Introduction 10
Setup Wizard Introduction 11
Setup Wizard for Open-loop Applications 12
Setup Wizard for Closed-loop Applications 17
Motor Setup 22
Changes Made Function 26
Changing Parameter Settings 26
Accessing All Parameters via the Main Menu 26
Main Menu 26
Quick Transfer of Parameter Settings between Multiple Drives 26
Transferring Data from the Drive to the LCP 26
Transferring Data from the LCP to the Drive 26
Readout and Programming of Indexed Parameters 26
Initialization to Default Settings 27
Recommended Initialization 27
Two-finger Initialization 27
Parameters 29
Parameter List 29
Parameter Group 0-** Operation / Display 32
AU363928304090en-000101/130R0982 | 3Danfoss A/S © 2021.07
Contents
VLT® Flow Drive FC 111
Programming Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English