Danfoss VLT Flow Drive FC 111 - Page 143

Table 286: Range:
Min: 0
Max: 10
Default value: 0
15-52 OEM Information
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: VisibleString
Change during operation: False
OEM Information. [0] means OEM name. [1] means OEM type code. [2] means OEM identification number. [3] means OEM serial
number.
Table 287: Range:
Min: 0
Max: 0
Default value: 0
15-53 Power Card Serial Number
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: VisibleString
Change during operation: False
View the power card serial number.
Table 288: Range:
Min: 0
Max: 0
Default value: 0
15-57 File Version
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: u_int16
Change during operation: False
The file version. [0] means OEM-SIVP file version. [1] means Motor database file version. [2] means Pump table file version.[3] means
ACP boot file version. [4] means MCP boot file version.
Table 289: Range:
Min: 0
Max: 65535
Default value: 0
15-59 Filename
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: VisibleString
Change during operation: False
The actual file name of OEM files.
Table 290: Range:
Min: 0
Max: 16
Default value: 0
4.12.4 15-9* Parameter Info
View information of available parameters in the drive.
15-92 Defined Parameters
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: u_int16
Change during operation: True
View a list of all defined parameters in the drive. The list ends with 0.
AU363928304090en-000101 / 130R0982 | 143Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide