Danfoss VLT Flow Drive FC 111 - Page 160

[25]
m
3
/h
[71]
bar
[73]
kPa
[74]
m Wg
[75]
mm Hg
[120]
GPM
[121]
gal/s
[122]
gal/min
[123]
gal/h
[124]
CFM
[125]
ft
3
/s
[126]
ft
3
/min
[170]
psi
[171]
lb/in
2
[172]
in WG
[173]
ft WG
[174]
in Hg
4.15.2 20-2* Feedback/Setpoint
Parameter group for feedback function and setpoints. Select which setpoint and feedback to use. The setpoint and feedback can be
a fixed pair or selected separately based on logic comparisons.
20-20 Feedback Function
Default value: [3] Minimum
Parameter type: Option
2-setup: All setups
Conversion index: -
Data type: u_int8
Change during operation: True
Select how the feedback should be calculated. The feedback can be either a single feedback source or a combination of several
feedbacks.
Table 364: Option:
[0]
Sum
[1]
Difference
[2]
Average
[3]
Minimum
[4]
Maximum
20-21 Setpoint 1
Default value: 0 ProcessCtrlUnit
Parameter type: Range
2-setup: All setups
Conversion index: -3
Data type: int32
Change during operation: True
AU363928304090en-000101 / 130R0982160 | Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide