Danfoss VLT Flow Drive FC 111 - Page 28

4.
•
•
•
•
•
•
•
The drive is now reset, except for the following parameters.
Parameter 1-06 Clockwise Direction
Parameter 15-00 Operating hours
Parameter 15-03 Power Up's
Parameter 15-04 Over Temp's
Parameter 15-05 Over Volt's
Parameter group 15-4* Drive identification
Parameter 18-10 FireMode Log:Event
AU363928304090en-000101 / 130R098228 | Danfoss A/S © 2021.07
Programming
VLT® Flow Drive FC 111
Programming Guide