Danfoss VLT Flow Drive FC 111 User Manual

[70]
mbar
[71]
bar
[72]
Pa
[73]
kPa
[74]
m Wg
[80]
kW
[120]
GPM
[121]
gal/s
[122]
gal/min
[123]
gal/h
[124]
CFM
[127]
ft
3
/h
[140]
ft/s
[141]
ft/min
[160]
Degree Fahr
[170]
psi
[171]
lb/in
2
[172]
in WG
[173]
ft WG
[180]
hp
0-31 Custom Readout Min Value
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: -2
Data type: int32
Change during operation: True
This parameter sets the minimum value of the custom defined readout (occurs at 0 speed). It is only possible to select a value differ-
ent from 0 when selecting a linear unit in parameter 0-30 Custom Readout Unit. For quadratic and cubic units, the minimum value is
0.
Table 24: Range:
Min: 0
Max: 999999.99 CustomReadoutUnit
Default value: 0 CustomReadoutUnit
0-32 Custom Readout Max Value
Default value: 100
Parameter type: Range
2-setup: 1 setup
Conversion index: -2
Data type: int32
Change during operation: True
This parameter sets the maximum value to be shown when the speed of the motor has reached the set value for parameter 4-14
Motor Speed High Limit [Hz].
Table 25: Range:
Min: 0.0
Max: 999999.99 CustomReadoutUnit
Default value: 100 CustomReadoutUnit
AU363928304090en-000101 / 130R0982 | 37Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English