Danfoss VLT HVAC Drive User Manual

Par. No. # Parameter description Default value 4 set-up Change during
operation
Conver-
sion index
Type
11-0* LonWorks ID 11-00 Neuron ID 0 N/A All set-ups TRUE 0 OctStr[6] 11-1* LON Functions 11-10 Drive Profile [0] VSD profile All set-ups TRUE - Uint8 11-15 LON Warning Word 0 N/A All set-ups TRUE 0 Uint16
11-17 XIF Revision 0 N/A All set-ups TRUE 0 VisStr[5]
11-18 LonWorks Revision 0 N/A All set-ups TRUE 0 VisStr[5] 11-2* LON Param. Access 11-21 Store Data Values [0] Off All set-ups TRUE - Uint8
6.2.11. 11-** LonWorks
VLT
®
HVAC Drive Instruction Manual
6. How to program the adjustable frequency
drive
MG.11.A4.22 - VLT
®
is a registered Danfoss trademark 113
6

Danfoss VLT HVAC Drive Specifications

General

Type	VLT HVAC Drive
STO (Safe Torque Off)	Yes
Enclosure	IP20
Output Frequency	0-500 Hz
Brake Chopper	Built-in (depending on frame size)
EMC Filter	Built-in (depending on frame size)
Communication	Ethernet
Power Range	0.37 kW to 630 kW
Input Voltage	200-240V, 380-480V, 525-600V
Protection Features	Overload, Overvoltage, Undervoltage, Short Circuit, Ground Fault
Ambient Temperature	-10°C to +50°C (with derating above +40°C)
Storage Temperature	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Cooling Method	Air-cooled