Danfoss VLT HVAC Drive User Manual

6.2. Parameter list
Parameters for VLT HVAC Drive FC 102 are grouped into various parameter groups to easily select
the correct parameters for optimized operation of the adjustable frequency drive.
The vast majority of HVAC applications can be programmed using the Quick Menu button and
selecting the parameters under Quick Set-up and Function Set-ups.
Descriptions and default settings of parameters may be found under the section Parameter Lists
at the back of this manual.
0-xx Operation/Display
1-xx Load/Motor
2-xx Brakes
3-xx Reference/Ramps
4-xx Limits/ Warnings
5-xx Digital In/Out
6-xx Analog In/Out
8-xx Comm. and Options
9-xx Profibus
10-xx CAN Ser. Com. Bus
11-xx LonWorks
13-xx Smart Logic
14-xx Special Functions
15-xx FC Information
16-xx Data Readouts
18-xx Data Readouts 2
20-xx FC Closed-loop
21-xx Ext. Closed-loop
22-xx Application Functions
23-xx Timed Actions
25-xx Cascade Controller
26-xx Analog I/O Option MCB 109
31-xx Bypass Option
VLT
®
HVAC Drive Instruction Manual
6. How to program the adjustable frequency
drive
MG.11.A4.22 - VLT
®
is a registered Danfoss trademark 99
6

Danfoss VLT HVAC Drive Specifications

General

Type	VLT HVAC Drive
STO (Safe Torque Off)	Yes
Enclosure	IP20
Output Frequency	0-500 Hz
Brake Chopper	Built-in (depending on frame size)
EMC Filter	Built-in (depending on frame size)
Communication	Ethernet
Power Range	0.37 kW to 630 kW
Input Voltage	200-240V, 380-480V, 525-600V
Protection Features	Overload, Overvoltage, Undervoltage, Short Circuit, Ground Fault
Ambient Temperature	-10°C to +50°C (with derating above +40°C)
Storage Temperature	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Cooling Method	Air-cooled