Danfoss VLT HVAC Drive User Manual

K
Kty Sensor 135
L
Language 65
Lcp 55, 60
Lcp 102 49
Leakage Current 4
Leds 49, 51
Line Connection For A2 And A3 31
Line Power Wiring Overview 30
Line Supply 139
Line Supply (l1, L2, L3) 144
Live Zero Timeout Function, 6-01 85
Live Zero Timeout Time, 6-00 85
Low Power Detection, 22-21 93
Low Speed Detection, 22-22 93
M
Main Menu 64
Main Menu Mode 53
Main Menu Mode 96
Main Reactance 76
Maximum Reference 82
Mct 10 59
Mechanical Dimensions 22, 25
Minimum Run Time, 22-40 94
Minimum Run Time, 22-77 95
Minimum Sleep Time, 22-41 94
Motor Current 66
Motor Frequency, 1-23 66
Motor Nameplate 46
Motor Nominal Speed, 1-25 66
Motor Output 144
Motor Overload Protection 3
Motor Power [hp] 66
Motor Power [hp], 1-21 66
Motor Power Parameter [kw], 1-20 65
Motor Protection 78, 144
Motor Speed Direction 4-10 83
Motor Speed High Limit [hz], 4-14 67
Motor Speed High Limit [rpm], 4-13 67
Motor Speed Low Limit Rpm, 4-11 67
Motor Thermal Protection, 1-90 78
Motor Voltage 66
Motor Voltage, 1-22 66
Mounting 17
Mounting A2 And A3 19
Mounting Of Unit 20
N
Nameplate Data 47
Nameplate Data. 47
Nlcp 55
No-flow Delay, 22-24 94
No-flow Function, 22-23 93
Non-ul Compliance 28
Index VLT
®
HVAC Drive Instruction Manual
154 MG.11.A4.22 - VLT
®
is a registered Danfoss trademark

Danfoss VLT HVAC Drive Specifications

General

Type	VLT HVAC Drive
STO (Safe Torque Off)	Yes
Enclosure	IP20
Output Frequency	0-500 Hz
Brake Chopper	Built-in (depending on frame size)
EMC Filter	Built-in (depending on frame size)
Communication	Ethernet
Power Range	0.37 kW to 630 kW
Input Voltage	200-240V, 380-480V, 525-600V
Protection Features	Overload, Overvoltage, Undervoltage, Short Circuit, Ground Fault
Ambient Temperature	-10°C to +50°C (with derating above +40°C)
Storage Temperature	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Cooling Method	Air-cooled