Please note that it is recommended to have a selection of screwdrivers (phillips or cross-thread
screwdriver and torx), a side-cutter, drill and knife handy for unpacking and mounting the ad-
justable frequency drive. The packaging for these enclosures contains, as shown: Accessories bag
(s), documentation and the unit. Depending on options fitted, there may be one or two bags and
one or more booklets.
3. Mechanical installation VLT
®
HVAC Drive Instruction Manual
16
MG.11.A4.22 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
