Danfoss VLT HVAC Drive User Manual

1.1.12. Software Version and Approvals: VLT HVAC Drive
VLT HVAC Drive
Instruction Manual
Software version: 2.0X
This Instruction Manual can be used for all VLT HVAC Drive adjustable frequency drives with
software version 2.0X.
The software version number can be seen in parameter 15-43.
1.1.13. Disposal Instructions
Equipment containing electrical components may not be disposed of
together with domestic waste.
It must be separately collected with electrical and electronic waste
according to local and currently valid legislation.
VLT
®
HVAC Drive Instruction Manual 1. Safety
MG.11.A4.22 - VLT
®
is a registered Danfoss trademark 9
1

Danfoss VLT HVAC Drive Specifications

General

Type	VLT HVAC Drive
STO (Safe Torque Off)	Yes
Enclosure	IP20
Output Frequency	0-500 Hz
Brake Chopper	Built-in (depending on frame size)
EMC Filter	Built-in (depending on frame size)
Communication	Ethernet
Power Range	0.37 kW to 630 kW
Input Voltage	200-240V, 380-480V, 525-600V
Protection Features	Overload, Overvoltage, Undervoltage, Short Circuit, Ground Fault
Ambient Temperature	-10°C to +50°C (with derating above +40°C)
Storage Temperature	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Cooling Method	Air-cooled