Danfoss VLT MCA 121 EtherNet/IP User Manual

3.1.6 Recommended Design Rules
While designing Ethernet networks special attention and caution must be taken regarding active network components.
While designing a network for line topology it is important to notice that a small delay is added with each every switch in the line.
It is not recommended to connect more than 32 drives in a line at any API. Exceeding the recommended design rules, may result in failing communication.
AutomationDri ve
VLT
Automat ionDr ive
VLT
AutomationDri ve
VLT
AutomationD rive
VLT
Automat ionDr ive
VLT
Automat ionDr ive
VLT
Automat ionDr ive
VLT
AutomationDri ve
VLT
AutomationD rive
VLT
Automat ionDr ive
VLT
Automat ionDr ive
VLT
Automat ionDr ive
VLT
Automat ionDr ive
VLT
AutomationDri ve
VLT
Max. 32 drives
3 How to Install MCA 121 EtherNet/IP
12 MG.90.J2.02 - VLT
®
is a registered Danfoss trademark
3

Danfoss VLT MCA 121 EtherNet/IP Specifications

General

Brand	Danfoss
Model	VLT MCA 121 EtherNet/IP
Category	Control Unit
Language	English