Danfoss VLT MCA 121 EtherNet/IP User Manual

12-01 IP Address
Range: Function:
[000.000.000.000 -
255.255.255.255]
Configure the IP address of the option. Read-only if par. 12-00 set to DHCP or BOOTP.
12-02 Subnet Mask
Range: Function:
[000.000.000.000 -
255.255.255.255]
Configure the IP subnet mask of the option. Read-only if par. 12-00 set to DHCP or BOOTP.
12-03 Default Gateway
Range: Function:
[000.000.000.000 –
255.255.255.255]
Configure the IP default gateway of the option. Read-only if par. 12-00 set to DHCP or BOOTP.
12-04 DHCP Server
Range: Function:
[000.000.000.000 –
255.255.255.255]
Read only. Displays the IP address of the found DHCP or BOOTP server.
NB!
A power-cycle is necessary after setting the IP parameters manually.
12-05 Lease Expires
Range: Function:
[dd:hh:mm:ss] Read only. Displays the lease-time left for the current DHCP-assigned IP address.
12-06 Name Servers
Option: Function:
IP addresses of Domain Name Servers. Can be automatically assigned when using DHCP.
[0] Primary DNS
[1] Secondary DNS
12-07 Domain Name
Range: Function:
Blank [0-19 characters] Domain name of the attached network. Can be automatically assigned when using DHCP.
12-08 Host Name
Range: Function:
Blank [0-19 characters] Logical (given) name of option.
12-09 Physical Address
Range: Function:
[00:1B:08:00:00:00 – 00:1B:
08:FF:FF:FF]
Read only Displays the Physical (MAC) address of the option.
6.2.2 Ethernet Link Parameters
12-1* Ethernet Link Parameters
Option: Function:
Applies for whole parameter group.
6 Parameters MCA 121 EtherNet/IP
36 MG.90.J2.02 - VLT
®
is a registered Danfoss trademark
6

Danfoss VLT MCA 121 EtherNet/IP Specifications

General

Brand	Danfoss
Model	VLT MCA 121 EtherNet/IP
Category	Control Unit
Language	English