EasyManuals Logo

Dantherm CDP 35T User Manual

Dantherm CDP 35T
Go to English
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
29
975676 • Version 2.8 • 19.01.2011
Service guide
Introduction The dehumidifier requires very little attention for trouble free running. All the necessary
safety and control functions have been built in. The fan motor(s) and the compressor
have permanent lubrication and require no particular maintenance.
Monthly service The air inlet filter is to be cleaned once a month. The filter is placed in a stand behind
the grille in the air inlet duct.
Please follow this procedure to perform the monthly service:
Step Action
1 Remove the grill from the duct and take out the filter
2 Wash the filter in tepid soapy water or vacuum clean thoroughly
3 Put the filter back in the filter stand and fasten the grille to the duct
Annual service The dehumidifier should be inspected once a year. Please follow this procedure to per-
form the annual service:
Step Action
1 Remove the front from the dehumidifier
2 Inspect the inside of the dehumidifier
3 Vacuum clean the dehumidifier to remove any dust or debris
Important: Vacuum clean the condenser thoroughly
4 Wash if necessary the lamella evaporator in tepid soapy water if it is badly
soiled

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dantherm CDP 35T and is the answer not in the manual?

Dantherm CDP 35T Specifications

General IconGeneral
BrandDantherm
ModelCDP 35T
CategoryDehumidifier
LanguageEnglish

Related product manuals