Data Aire gForce DX - Installation of Remote Outdoor Heat Exchanger; Figure 13 EEV with Electrical Mating Connector

45
make this electrical connection, this connector can only properly mate in one position as
shown in the picture below.
Figure 13 EEV with Electrical Mating Connector
WARNING: DO NOT try to mate this connector in any other direction or
attempt to use excessive force to make the electrical connection
4.0 INSTALLATION OF REMOTE OUTDOOR HEAT EXCHANGER
Air cooled condenser and fluid coolers have individual Installation, Operation and Maintenance
Manuals which should be referred to for more complete details regarding remote heat
exchangers.