CD820 Instant Issuance System User’s Guide 17
Press the U
SER button to suspend the printer. Then, press ENTER to enter the menu system. Use
the arrow keys to move through the menus, and press E
NTER to make a selection. The menu
system has four major branches:
Use the Maintenance menu to run a cleaning card, print a test card, or reset the locks on a
system with locks.
Use the Status menu to see settings and data about the printer.
Use the Configuration menu to change settings.
Use the Activate menu to enable or disable secure features of the printer.
HINTS & TIPS
You can access the menu system when Ready displays on line 1 of the LCD panel.
The printer returns to the Ready status after 2 minutes of no activity. Changes that have not
been applied are lost.
To leave a selection without changing the value, press the up or down arrow key until Exit
displays, and then press E
NTER.
Use the Activate menu only during installation or removal of financial systems
that require activation.
To Next Page
Loading...
Need help?
General
