CD820 Instant Issuance System User’s Guide 41
Network Installation Troubleshooting
Card Appearance
Card appearance problems can be caused by many different factors. Click the link below that best
describes the card appearance issue on the printed card.
Something did not print on page 42
The color printing has flaws on page 42
The printing is too light on page 44
The printing is too dark on page 44
The monochrome printing has flaws on page 45
Problem Solution
The network cable is
loose.
Reconnect the data cable to the network port and the printer.
Restart the printer.
The printer displays
Ready on the LCD panel,
but it is not available.
Follow your network troubleshooting procedures to isolate
and test each component of the computer-to-printer
communication link.
Suggestions:
Verify the computer-to-network connection by accessing a
network resource, such as a network drive.
The network administrator can test communication
between a server and the printer.
Make sure that the user is logged on to the network.
The printer is not
configured with the
correct network address
Make sure that the server name or IP address is entered in the
Port Settings or Configure Port dialog box on the computer.
For more information about retrieving the printer’s IP
address, refer to “Retrieve the Printer’s Network IP Address”
on page 18.
Make sure that Ready displays on the printer's LCD panel.
To Next Page
Loading...
Need help?
General
