22 Using the System
Use the Exception Slot
The exception slot allows you to insert a single card, such as a different card type than those
loaded in the input hopper. The input hopper does not have to be opened to insert a card
through the exception slot.
Do the following to insert a single
card into the printer using the
exception slot.
1. Slide the card into the exception
slot.
2. Push the card all the way into the
input hopper. The card slides
under any cards already in the
input hopper so that it can be
picked.
In a printer with the optional multi-hopper, the card slides under any cards in hopper 2.
Load the Print Ribbon
Load the print ribbon when you install the printer and when the ribbon runs out.
1. Unlock the printer and open the printer supplies access door on the optional multi-hopper.
2. Open the printer cover.
3. Remove the print ribbon cartridge.
To Next Page
Loading...
Need help?
General
