DataCard SR300

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 47
13. Theprinterisinstalledwithsharingenabledbydefault.EnteraSharenameifneeded,and
thenclickNext.TheSharenamecannotcontainanyspaces.
 Usetheprinternameshownor,ifyouplantosharetheprinter,removethespacesothat
itdisplaysasSR‐CPU1.
 Tosharetheprinter,referto“SharingaPrinteronaNetworkConnection”onpage 76.
 Sharingcanbedisabledafterthedriverisinstalled,ifneeded.
14. SelectCreateanewportandusetheportnameprovided.ClickNext.