22 • Overview Datacolor 650/600/400 User's Guide
2. When you complete the instrument configuration and select Save Setup, the
program prompts you to place the diskette or CD containing the calibration data
in the appropriate drive. When you do this, a screen similar to the one below will
appear:
3. Two files should be displayed. If they are not, browse to the correct drive/folder
location.
4. You must load both
files. Highlight both file names, and click Open. The files
will be transferred to the system. When the transfer is completed, the program
will prompt you to calibrate the instrument. A calibration screen similar to the one
below will appear:
5. Click Calibrate to start the instrument calibration or Cancel to close the window.
NOTE
Instrument calibration can also be accessed through a separate menu option
or function button in the program window. The User’s Guide for the program
you are running contains detailed instructions to access the calibration
options.
To Next Page
Loading...
