Datacolor 650 - Transmission Sample Holder Base; Transmission Sample Holders

Datacolor 650/600/400 User's Guide Accessing the Transmission Compartment • 27
Transmission Sample Holder Base
This base is installed by the user. It is used to mount the sample holder correctly in the
chamber.
Transmission Sample Holders
Two sample holders are provided for transmission measurements. One is designed to hold
a cuvette used for measuring liquids. The other is used for solid, transparent samples such
as plastic plaques.
NOTE
The cuvette holder is designed to hold a cuvette 50mm X 10mm (Datacolor Part No. 2950-
0004).
Cuvette Holder
(liquid samples)
Solid samples