Datacolor 650/600/400 User's Guide Sample Presentation and Measurement Overview • 33
Sample Presentation and
Measurement
Sample Presentation and Measurement Overview
You must pay close attention to the positioning of the sample to insure an accurate
measurement. When positioned correctly, the sample rests between the sample holder
and the front panel door. The sample must completely cover the aperture opening.
Reflectance Measurements
1. Grasp the sample holder and pull forward.
2. Position the sample, then carefully bring arm back up to normal operating
position.
WARNING
Do not allow sample arm to spring back. For the Datacolor 600V (vertical
mount), the cylindrical, spring-loaded sample holder can be depressed to
position your sample. You can return the cylinder to its normal position with a
quarter turn of the cylinder.
To Next Page
Loading...
