Datakom D-300 MK2 - Wi-Fi PARAMETERS

D-300 MK2 User Manual Firmware V-6.3
L052D01-EN - 105 -
Parameter Definition
Unit
Min
Max
Factory
Set
Description
Rainbow Refresh Rate
sec
0
65535
5
The unit will update the distant
monitoring terminal with this rate.
Rainbow Address-1 Port
-
0
65535
0
This is the port number of the first
monitoring terminal address.
Rainbow Address-2 Port
-
0
65535
0
This is the port number of the second
monitoring terminal address.
SMTP Port
-
0
65535
587
This is the port number used for e-mail
sending.
E-mail on IP Change
-
0
1
0
This parameter controls e-mail sending
when IP address of GPRS or ethernet
connection is changed. No warnings
generated.
0: no e-mail on IP change
1: e-mail sent on IP change
Wi-Fi parameter can be configured only from PC software.
Parameter Definition
Factory Set
Description
SSID
………...….
This is the name of wireless network that you want to
connect.
Wi-Fi Password
………...….
This is the password of wireless network that you want
to connect.
16.15. Wi-Fi PARAMETERS
Below ETHERNET related parameters are found in the
Controller Configuration group.