The module provides resources for 32 additional digital inputs
and 32 additional digital outputs.
Digital inputs can be extended using DKG-188 Digital Input
Extension modules, each one providing 8 inputs. Digital
inputs are programmable through the main controller. The
switching characteristic is not programmable and must be
battery negative. Any function can be assigned to digital
inputs.
Digital outputs can be extended using DKG-186 Fet
Extension modules, each one providing 8 outputs. Digital
outputs have the same electrical characteristics as on board
outputs. They have programmable functions through the
main controller. Any function can be assigned to any output.
Input and output extension modules are connected to the
main controller in a cascade structure, in any order. The
connection cable is provided with each extension module.
To Next Page
Loading...
